Shanghai Shanyi Metallurgical Technology Co.,Ltd

pickling line(1)

Shanghai Shanyi Metallurgical Technology Co.,Ltd

Showing 1 - 10 of 19, total 2 pages [First] [Previous] [Next] [Last]

polyurethane sandwich panel line
Specification: Polyurethane Sandwich Panel Line
Detail: Polyurethane Sandwich Panel Line is to mix the PU stock liquid in high-pressure foaming system in certain ratio, pour on bottom color sheet which is shaped by lower forming roll, then convey into double conveyer with top color...

cross cutting line
Specification: Cross Cutting Line
Detail: The cross cutting line is to cut metal coil into strip according to the requirements of customers along lateral direction.This line is mainly composed of pay-off part,flattener,looper,feeding part,slitting part and stacking pa...

slitting line
Specification: Slitting Line
Detail: Slitting Line is to cut coiled wide strip steel into narrow strip steel of a certain width along the lengthwise .Then twine it into strip coil,to prepare blanks for the rolling ,welding ,cold bend forming stamping etc. It is c...

tension leveler
Specification: Tension Leveler
Detail: In order to get good plate shape,to eliminate the wavy edge,wave shape ,bulge and slight camber , the equipment is applied for the treatment of cold roller plate and galvanized plate , improving mechanical property of the plat...

temper mill
Specification: Temper Mill
Detail: The work hardening for cold rolled strip steel can be eliminated after recrystallization annealing. After annealing, the yielding point is low and the fracture elongation rate is high. The sudden fracture of ¡°coiling and...

skin pass
Specification: Skin Pass
Detail: Skin pass is widely equipped in the modernized wide-strip hot-dip galvanizing line .It can improve flatness of the sheet,uniform and refine the silvery white ***ngles through pressing zinc grain on surface of the sheet ,which ...

hood-type annealing furnace
Specification: Hood-type Annealing Furnace
Detail: Hood-type annealing furnace annealing is to stack a number of coil up, heat it with a shield covered, cool it when it reches the annealing temperature . Based on different heat sources , it can be divided into gas, oil and ele...

stainless steel annealing furnace
Specification: Stainless Steel Annealing Furnace
Detail: In order to maintain the bright surface generated by the former cold rolling process, the strip steel need to be bright annealed When Carrying the annealing and recrystallization. Bright annealing of the stainless steel is an...

carbon steel continuous annealing line
Specification: carbon steel continuous annealing line
Detail: It is a continuous annealing treatment equipment on line of cold rolling carbon steel ,using to eliminate work hardening during rolling process .In order to improve mechanical behavior, it change the internal organization stru...

silicon steel annealing line
Specification: Silicon steel annealing line
Detail: Silicon steel annealing line is that silicon steel is paid-off and heated treatment in annealing furnace continuously, so as to obtain good structure property of inner steel strip. There are to kinds of furnace ,horizontal fur...


Showing 1 - 10 of 19, total 2 pages [First] [Previous] [Next] [Last]
1 2